Optional modules

OVERVIEW

All these boards can be connected to our processing boards (CAM MASTER, CAM MASTER +, CAM SMOOV +, CAM GURU).

IMA2M_OV2715 – OV2715 from OMNIVISION

FullHD (1080p30), native resolution image sensor board based on consumer type image sensor, 1/3inch : OV2715 from OmniVision

IMA2M_CMV & IMA4M_CMV – CMV2000 from CMOSIS

FullHD (1080p120) HDR native resolution sensor with global shutter for professional applications (broadcast TV, machine vision/inspection, defense/police, border surveillance, etc…) based on 2/3 inch high quality image sensor : CMV2000 from CMOSIS
(as an option we also have the same board with a 4 Mpixels sensor, CMV4000. Reference is then IM4M-CMV)

IMA2M_E2V – Sapphire from E2V

2M Sapphire sensor

IMA12M_CMV – CMV12000 from CMOSIS

12Mpixel (4096 x 3072) “4K” sensor with global shutter for professional applications (cinema, broadcast TV, machine vision/inspection, seashore/border surveillance, etc…) based on APS-C/35mm format, 10 (300FPS) or 12bit (180FPS), high quality image sensor : CMV12000 from CMOSIS
(full FPS requires to use our “PIXTERA” front end co-processing board, or a go for a lower framerate using CAMSMOOV (16 of 64 LVDS links used))

IMA20M_CMV – CMV20000 from CMOSIS

20Mpixel “4K” sensor, high quality image sensor : CMV20000 from CMOSIS
(full FPS requires to use our “PIXTERA” front end co-processing board, or a go for a lower framerate using CAMSMOOV (16 of 64 LVDS links used))

IMA17M_DYN – IMA17M from DYNAMAX

IMA1M_LYNX – “Lynx” from PHOTONIS

HD Ready (720p60) very high sensitivity, extremely low noise native resolution sensor with rolling shutter for night vision and scientific applications.
Based on 2/3 inch high quality image sensor : “Lynx” from PHOTONIS

IMA1M_OV10630 – OV10630 from OMNIVISION

HD (720p30), high dynamic range (HDR/WDR), high sensitivity, native resolution image sensor board based on, 1/3inch, consumer type image sensor : OV10630 from OmniVision

IMASWIR_CACTUS – “Cactus” from 3-5 LAB

SWIR (short wave infrared) sensor, 1000 to 1700nm spectral band, based on a 2/3inch high end SWIR sensor : “Cactus” from 3-5 lab
Remark : can be associated to a double level peltier cooling board called “SWIRCOOL”
Download IMASWIR sensor board datasheet.

PIXTERA

A rich Image Processing library & algorithms (fruit of over 10 years of R&D) embedded in a powerful platform and expertise services.
Check our PIXTERA Hardware video processing powerful platform.

DVR_NVHD

Analog composite
4x analog composite (PAL / NTSC) simultaneous video inputs converter based on TI’s TVP5158

HDMI_NVHD

HDMI input
Based on Analog Device’s HDMI ADV7441A receiver

HDADC

HD analog RGB components and Sony FCB-H11 input
A HD analog components input (RGB/YPrPb) + links to Sony FCB-H11 module LVDS and serial control YPrPb input is based on TI’s TVP7002

PCIe_SDI

3G-SDI input output
Dual SDI-3G input or output (can be software configured as 1x RX, 1x TX or dual RX or dual TX)

DISPOLED_5M

Microoled display module for head mount display and viewfinders.
High end 5M subpixels display (Microoled’s IZUMI), monochrome or color. Very small size module with configurable FPGA.
Download Dispoled 5M datasheet.

NVHD_CXP

• Dual video and IO link (NVHD type) used as input for video sensor, or output to microoled displays (see our DISPOLED module) Nb : dual NVHD link enables stereo video sensor capture or 3D display.
• Coaxpress receiver or transmitter (factory configured)
• BNC connector
• General purpose IO (FPGA configurable as I2C, SPI, RX/TX link) : can be used to control a synchonised pulsed LED flash illuminator or any IR filter cut actuator, zoom motorization board etc…
• Plugable power board, factory configurable as power receiver or generator (from or to the PowerOverCoax)
• 3.125 Gbit/s downlink from image sensor head to video recorder/streamer.
• 21 Mbit/s uplink from video recorder to image sensor head or HMD.
• Power Over Coaxial cable : 12W continuous.

CXP_PCIe

• 2 x Coaxpress receiver or transmitter (factory configured. can be one TX, one RX or dual TX or dual RX)
• MCX connectors
• SERDES link to the onboard FPGA (for example : CAMSMOOV’s Xilinx Spartan6 FPGA)
• 3.125 Gbit/s downlink from image sensor head to video recorder/streamer.
• 21 Mbit/s uplink from video recorder to image sensor head or HMD.
• Power Over Coaxial cable : 12W continuous.

MULTILINK

• PCIe link board
• 9 x video and IO links (NVHD type) that can used as inputs for video sensor board or output to microoled displays (see our DISPOLED module) or link to another CPU board in the video processing flow (typically CAMSMOOV)
• One MiniPCIe link with 2x RX/TX PCI lines (can be used as any SERDES type propretary link)
• On board Xilinx Spartan 6 FPGA with one DDR3 16bit bus SDRAM for image pre-processing (sensor fusion, panoramic stitching, etc..) and buffering

Lighting

18 000 Lumens